Second Day (18 September 2020, Friday)

Keynote Speaker (09.00-09.30)
Moderator:Prof.Dr. Ashwani K. Gupta
Speaker :
5. Session 09.45-11.00(English Presentation)
Moderator:Prof.Dr. Nafiz KAHRAMAN
Speaker : MERSIN HÜRPEKLI
INVESTIGATION OF COMBUSTION OF DIESEL-ETHANOL FUEL BLEND IN COMPRESSION IGNITION ENGINE

Speaker : RAMAZAN ŞENER
Optimization of Injection Parameters for Compression Ignition Engine using Genetic Algorithm

Speaker : ORKUN ÖZENER
CO2 Analyses With Model Based Regulatory Tools: VECTO Application For İstanbul Public Transportation Case

Speaker : HÜSEYIN GÜRBÜZ
THE EFFECTS OF POST INJECTIONS OF HYDROGEN ON DIESEL ENGINE POWERED BY ETHANOL FUMIGATION

Speaker : EBUBEKIR BEYAZOGLU
MODELING AND OPTIMIZATION OF A FLUIDIZED BED GASIFICATION
6. Session 11.10-12.25 (Turkish Presentation)
Moderator:Prof.Dr. Selahattin Orhan AKANSU
Speaker : SERTAÇ EYÜBOĞLU
DİZEL ENJEKTÖR MEMESİNİN SICAKLIK DEĞİŞİMİNİN İNCELENMESİ

Speaker : NESLIHAN DURANAY
TARIMSAL ATIKLARIN YANMA DAVRANIŞINA TORREFAKSİYONUN ETKİSİ

Speaker : DUYGU SOFUOĞLU
BİR TERS AKIŞLI YAKMA SİSTEMİNDE DİMETİL ETER KULLANIMININ YANMA KARAKTERİSTİKLERİNİN VE ALEV SÖNME SINIRLARININ İNCELENMESİ

Speaker : HÜSEYIN DEĞIRMENCI
HİDROJENCE ZENGİNLEŞTİRİLMİŞ METAN BAZLI FARKLI YAKIT KARIŞIMLARI İÇİN İS OLUŞUMLARININ LAZER KAYNAKLI AKKORLUK YÖNTEMİYLE İNCELENMESİ

Speaker : REMZI TIMUR
KIZGIN BUHAR TEKNOLOJİSİ İLE YİYECEKLERİN SAĞLIKLI PİŞİRİLMESİNE KATKI SAĞLAYAN VE ÇOK FONKSİYONLU ÇALIŞAN YENİLİKÇİ ENDÜSTRİYEL PİŞİRME FIRINI PROTOTİPİNİN TASARIMI VE GELİŞTİRİLMESİ
7. Session 13.45-15.00 (Turkish Presentation)
Moderator:Asst.Prof.Dr. Nurettin DİNLER
Speaker : TAHIR AYAZ
METAN VE ETİL ALKOLÜN GÖNDERİM HIZI DEĞİŞİMLERİ İÇİN FARKLI YANMA ODASI TASARIMLARINDA YANMA KARAKTERİSTİKLERİNİN KARŞILAŞTIRMALI OLARAK İNCELENMESİ

Speaker : MUSTAFA DENIZ ALTINKURT
Dizel-Biyodizel-İzobütanol Üçlü Karışımları Kullanılan Bir Dizel Motorda Performans ve Emisyon Karakteristiklerinin Deneysel Olarak İncelenmesi

Speaker : SAMET USLU
OPTIMIZATION OF OPERATING PARAMETERS OF METHANOL USED GASOLINE ENGINE WITH TAGUCHI

Speaker : REMZI TIMUR
DESIGN AND DEVELOPMENT OF AN INNOVATIVE INDUSTRIAL COMBI COOKING OVEN PROTOTYPE TO IMPROVE TEMPERATURE AND AIR TEMPERATURE DISTRIBUTION AND ENERGY SAVING

Speaker : KUBILAY BAYRAMOĞLU
DETERMINATION OF PERFORMANCE AND EMISSONS PARAMETERS ON A HYDROGEN INJECTED HCCI DIESEL ENGINE
8. Session 15.15-16.30 (Turkish Presentation)
Moderator:Prof.Dr. Bilge ALBAYRAK ÇEPER
Speaker : CANER AKKUŞ
OPTIMIZATION OF PISTON BOWL GEOMETRY IN TERMS OF FUEL CONSUMPTION AND EMISSIONS USING COMPUTATIONAL FLUID DYNAMICS IN A DIESEL ENGINE

Speaker : DUYGU ELMA KARAKAŞ
Production and application of grass waste supported Ni catalyst for hydrogen production by the degradation of sodium borohydride in methanol

Speaker : EMRAH KANTAROĞLU
HİDROJEN KATKISININ ÇİFT BUJİ ATEŞLEMELİ MOTOR KARAKTERİSTİKLERİNE ETKİSİ

Speaker : BARIŞ GÜREL
YUMURTA KABUKLARININ YERLİ LİNYİTLE BİRLİKTE KABARCIKLI AKIŞKAN YATAKLI KAZANDA YAKILMASINDA BACA GAZI EMİSYONLARININ DEĞİŞİMİNİN İNCELENMESİ

Speaker : SÜLEYMAN ŞIMŞEK
PIROLIZE EDILMIŞ LASTIK YAĞI KULLANILARAK ELDE EDILEN YAKITIN TEK SILINDIRLI DIZEL MOTOR PERFORMANS VE EMISYONLARA ETKISI
9. Session 16.45-18.15 (English Presentation)
Moderator:Asst. Prof.Dr. Essam ABO SERIE
Speaker : BUĞRAHAN ALABAŞ
The Effect of Oxygen Enrichment on Combustion Instabilities for Synthetic Gases Fuels with Different H2/CO ratios

Speaker : YASIN ŞÖHRET
ENVIRONMENTAL AND ENVIROECONOMIC ANALYSES OF A GASOLINE FUELED SI ENGINE

Speaker : RAŞIT ATALGE
Anaerobic co-digestion of defatted spent coffee grounds with different waste substrate for biogas production

Speaker : ARŞ. GÖR. ENES FİL
Impact Of Diesel-Ethanol Fuel Blends On The Performance And Emissions Of A Compression Ignition Engine

Speaker : MEHMET SALIH CELLEK
Assessment of detailed and reduced-kinetics mechanisms for combustion and emissions of gas fuels

Speaker : ÖĞR. GÖR. ESENAY ARSLAN
INVESTIGATION OF NATURAL GAS-DIESEL FUEL MIXTURE IN TERMS OF ENGINE PERFORMANCE IN COMPRESSION IGNITION ENGINE